Multimedia Message Setup Guide (MMS)
Receiving and installing Internet and multimedia messaging on tablets and smart phones is based on the operating system of these devices and does not change based on brand and device type. Devices with similar operating systems and brands have the same setup. To find out the type and version of the operating system installed, you can refer to the Settings / About Device section on your device.
✔ Active data activation and data deactivation for tablets with different operating systems are similar to the above with the operating system.
Note: Due to the difference between Android operating system’s User interfaces “UI” on different phones, there is a possibility of minor changes to settings of some devices as compared to the displayed images.
1- First select “Settings”.
2- From “Settings” menu, enable “SIM Cards & mobile networks” option.
3- Select RighTel SIM Card.
4- Select “Access Point Names” option.
5- You can add (New APN) via Add (+) option.
6- In opened window, enter information according to the below images and then select “Save” via three points at the top of page or in “More” section.
Note: Due to the difference between Android operating system user interface (UI) on different phones, there is a possibility of minor changes to some phones settings as compared to displayed images.
1- First select “Applications”, then select “Settings”.
2-In “Settings” menu, enable “Connections”.
3- Select “Mobile networks”.
4. Select “Access Point Names”.
5-You can add “New APN” via the Add (+) option.
6- In opened window, enter information according to the below image and select “Save” from three points of the top page.
Note:Due to the difference between the Android operating system’s User interfaces “UI” on different phones, there is a possibility of minor changes to the settings of some devices as compared to the displayed images.
1- First select “Application”, then select “Settings”
2- In “Settings” select “Mobile Network”.
3- Select “Access Point Names”.
4- You can apply + option to add a new APN.
5-In the opened window, enter information in the image below and select (Save) from three points of the top page.
Note:Due to the difference between the Android operating system’s User interfaces “UI” on different phones, there is a possibility of minor changes to the settings of some devices as compared to the displayed images.
1- First select “Application”, then select “Settings”.
2- In “Connections” select “Mobile Networks”.
3- Select “Access Point Names”.
4-You can select (New APN) via the Add option.
5- In the opened window, enter the information as shown in below picture.
2- In “wireless & networks” select “more”.
3- Select “Mobile Networks”.
4- Select “Access Point Names”.
5- In APN + select “New APN”.
6- In the opened window, write the information exactly as shown in below picture.
2- In “wireless & networks” select “more”.
3- Select “Mobile Networks”.
4- Select “Access Point Names”.
5- In APN + select “New APN”.
6- In the opened window, write the information exactly as shown in below picture.
2- Select “More Settings” .
3- Select “Mobile Networks”.
4- Select “Access Point Names”.
5- In APN + select “New APN”.
6- In the opened window, write the information exactly as shown in below picture.
2- Select “wireless & networks”.
3- Select “Mobile Networks”.
4- Select “Access Point Names”.
5- In APN + select “New APN”. Then, write the information exactly as shown in below picture.
1- First select “Setting”, then select “Cellular”.
2- Select “Cellular Data Network”.
3- Do the settings as shown below.
For information on how to activate the Internet, refer to Data activation guide page.
Note:The Cellular Icon in versions 10 & 11 of this operating system has changed as follows.
1- First select “Setting”, then select “Cellular”.
2- Select “Cellular Data Options”.
3- Select “Cellular Data Network”.
4- Perform the settings according to the below picture.
For information on how to activate the Internet, refer to Data activation guide page.
1- First select “Setting”, then select “Mobile Data” option.
2- Select “Mobile Data Network”.
3- Write the information exactly as shown in below picture.
1- First select “Setting”, then select “Cellular” option.
2- Select “Mobile Data Network”.
3- Write the information exactly as shown in below picture.
1- First select “Setting”, then select “Cellular” option.
2- Select “Cellular Data Network”.
3- Write the information exactly as shown in below picture.
1- First select “Setting”, then select “General”.
2- Select “Cellular” option.
3- Select “Cellular Data Network”.
4- In MMS part, insert the information of below picture.
1- In “Menu” select “Settings”.
2- In “Settings” select “General”.
3- Go to “Network”.
4- Select “Cellular Data Network”.
5- Write the settings based on below picture.
1- Select “Setting”.
2- Select “SIM + Mobile”.
3- Select “SIM Setting”.
4- Enable “Add MMS APN”.
5- In the opened window, write the settings based on below picture.
6- Then save the changes.
1- Select “Setting”.
2- Select “Mobile Network”.
3- Select “Add MMS APN”.
4- In the opened window, write the settings based on below picture.
5- Then save the changes.
1- Go to Start, select “Setting”.
2- From Setting, select “Connections”.
3- Write the below information in the blank boxes.
4- Go to “Modem” and select “New”.
5- Fill the boxes as follows then click on Next.
6- In “Access Point Names” after writing “RighTel-WAP” select next and go to next stage.
7- Enter to “Menu” and then select “Messaging”.
8- Select “Menu”.
9- Select “MMS Options”.
10- Select “New”.
11- Fill the boxes as follows then click on “Done”.
1- First select “Application”, and then select “Setting”.
2- Select “Network” from “Setting”.
3- Select “Connections”.
4- Select “New”.
5- Write the exact information in the picture then save the changes.
1- First select “Text Message”.
2- Select “More” from tools bar.
3- Select “Setting”.
4- Select “Text Message”.
5- Select “MMS”.
6- Select “Advanced”.
7- In “APN” write “WAP – RighTel”.
8- Perform the settings based on below picture, then save the changes.
1- Go to “Menu” and select “Setting”.
2- Select “Applications”.
3- Select “Messages”.
4- Select “Multimedia Message Center”.
5- Select “Automatic” option so that the changes will be made automatically.
6- If you wish to do “Manual” settings, select “Defined User” and fill the blank boxes based on below table.
1- Go to Menu, select “Setting”.
2- Select “Connectivity”.
3- Select “Destinations”.
4- Select “Access Point”.
5- It will ask you a question, click “No”.
6- Select “Packet Data” from the shown window.
7- In “Packet Access Point Name”, write wap-RighTel. Then select OK.
8- In the opened window, select “WAP Services”.
9- The below message is shown.
10- Then select “Wap Services”.
11- Select “wap-RighTel”.
12- Then select “Options”.
13- Select “Advanced Setting”.
14- Finally, in the opened window write parameters as follows.
