Ri-Fi Usage Guide

Features

• Supports Rightel 3G network
• Easy and quick battery charging via USB port of computer and other devices
• Supports regular-sized SIM cards
• Battery with 5 hours of continuous use and 150 hours standby
• Support for memory cards (Micro SD) up to 32 GB
• Ability to connect up to 10 simultaneous users
• Easy and fast connection to the Internet
• Supporting SMS
• No support for roaming

How to install
Preparation:

1- Press the back cover forward and remove it.

2- Remove the battery.

3- Insert the SIM card in the specified slot and write down the device name and password on the label.

4- Put the lid back in place.

5- Press the button until the indicator is illuminated.

Wi-Fi Indicator Guide
The device has an on/off switch. You can use the 3 indicators to obtain information about the status of the device in different situations.

Connect to Internet

1. via Wi-Fi
   If your device has Wi-Fi capabilities, from the existing Wi-Fi networks list, click on the name of your modem, then enter your user password in the window that opens and click OK. Now, you are connected to high-speed Internet via Rightel network.
2. Via Cable
   2.1 connect the devices to your system with the cable.
   2.2 The operating system automatically detects new hardware and start to install it.
   Note:
   If the program does not automatically run, double-click on autorun.exe on the drive path and run the Auto-run file.
3. 2.3 Follow instructions that appear on the screen to perform the installation.
   2.4 After installing the program, an icon of the software will be displayed on your computer screen.
   2.5 At the end of the installation process, the program will automatically start. After this step, if the modem is connected to the computer, the Device Manager will automatically run. You can also double-click on the computer screen to run Device Management.

The setting to install and use the modem via cable is similar to modem wu260 of Rightel.
For information on how to install the modem wu260 of Rightel click here.

Software Settings
For any changes in software settings when your device is connected to Ri-Fi, on your Internet browser enter 192.168.1.1 on URL bar; in the opened window type your username (admin) and password (admin).

In the opened window you can change the username and password of the device.
To change the device password, you can proceed from the following path.
Settings / WLAN Settings / WLAN Security Settings / Change password WPA Pre – Shared.   from the help section you can access the modem manual

Updating Ri-Fi Software
When the modem is on, if the modem is not connected to any device in wireless mode, after 30 seconds the device is reset, the WiFi light turns off and the modem goes to sleep mode. When the last modem user, disconnects the wireless connection, the WiFi indicator turns off after 2 minutes and the modem goes to sleep. Pressing any of the modem buttons, exits the sleep mode and activates the modem.
It is recommended to update Ri-Fi Software to increase standby time from 2 minutes to 15 minutes. It’s worth mentioning that update operations are performed on the Windows operating system.Please, pay attention to the following points before updating

1. Remove SIM Card from the modem.
2. Connect the Ri-Fi to your computer with a cable.
3. Install the software according to how to use Ri-Fi.
4. Close the software.
5. Download and run the following file on your computer.
   RighTel-WMF-280-Firmware update
6. Click on the file and continue process as below images to display the finish option.
   
   
   
   
   
   Your Ri-Fi software is updated now.

Warranty

Dear subscriber; the warranty period of purchased device is from the date of purchase for one year.

Properties

• Supports Rightel 3G network
• Easy and quick battery charging via USB port
• Supports regular-sized SIM cards
• Battery with 6 hours of continuous use and 300 hours standby
• Easy and fast connection to the Internet
• Supporting SMS
• Simultaneous connection of up to 9 users
• National roaming Support

Installation
Devices Preparation
1. Remove the back cover.

2. Remove the battery.

3. Insert the SIM card in the specified slot and write down the device name and password on the label.

4. Put the lid back in place.

5. he device has on/off button. Press the button as it can be seen in the picture until the device is on.

Indicator Guide for Ri-Fi E5330
You can use the 5 indicators to obtain information about the status of the device in different situations.

Connect to Internet

1. via Wi-Fi
   If your device has Wi-Fi capabilities, from the existing Wi-Fi networks list, click on the name of your modem, then in the window that opens, enter your user password, and then click OK. Now, you are connected to high-speed Internet in Rightel network.
2. Via Cable
   2.1 connect the devices to your system with the cable.
   2.2 The operating system automatically detects new hardware and the managing panel pops up as the following picture.

Software Settings
Username and password settings of the device
For any changes in software settings when your device is connected to Ri-Fi, on your Internet browser enter 192.168.1.1 on URL bar; in the opened window type your username (admin) and password (admin).

In the opened window you can change the username and password of the device.To change the device password, you can proceed from the following path.
Settings / WLAN / WLAN Basic settings
In WPA Pre-Shared Key you can change the password that is provided at the back of your device.
PIN Settings
If SIM PIN Code is enabled, after entering the user panel of modem, message “Pin required” is displayed. The SIM PIN must be entered and then choose “Apply”.
If you wish to disable PIN, at this point choose “Disable PIN verification” so that the option will be disabled on the SIM PIN.

To disable, change or activate SIM PIN Code you can apply the following methods:
1- Use other devices such as smart phones and tablet.
2- change settings from the following path:
Setting/Security/ PIN Management / PIN operation

APN Settings
To use Rightel high-speed Internet you should set the APN. To access APN settings you can track bellow path:
Setting/Dial Up/Profile Management
Its configuration is as follows:
Profile name:RighTel
APN: Static
APN name: RighTel

After setting APN, you can use the Internet. It should be noted that applying these settings is required only once and then connecting the modem to any other device will not need to reset the APN.

Sleep Mode Settings
If the modem is not used, the default mode is Sleep Mode. After 10 minutes the network connectivity is interrupted. The following path can extend the time up to 120 minutes.
Setting/ Mobile Connection /Auto Disconnect Interval (Min)

Roaming Settings
The modem can be used in roaming mode. Settings of the modem in default state is on auto mode, so roaming is automatically selected. If the modem is used in roaming mode, in the main page of user panel “RighTel Roaming” is displayed.

Under normal conditions when the modem is in roaming mode, there will be no Internet access. If you want to use the Rightel Internet in roaming mode, you should set Data Roaming to enable from the following path:
Setting / Dial Up /Mobile Connection /Data Roaming

To disable roaming mode you can use below path:
Setting/Dial Up/Network Settings/Preferred mode

Warranty

Dear subscriber; the warranty period of purchased device is from the date of purchase for one year.

Properties

• Supports Rightel 3G network
• Easy and quick battery charging via USB port
• Supports regular-sized SIM cards
• Battery with 7 hours of continuous use and 300 hours standby
• Quick and easy connection to the Internet
• Supporting SMS
• simultaneous connection of up to 8 users
• OTG cable is provided with the modem
• Roaming-support

Installation Method

Preparing the Device

1. Press the back cover forward and remove it.

2. Remove the battery.


3. Insert the SIM card in the specified slot and from the label behind the battery, write down the device name and password.

4. Put the lid back in place.

5. The device has on / off button. Press the button as shown below, to turn the device on.

Indicator Guide

You can use the indicators to obtain information about the status of the device in different situations.

Connect to Internet

1. via Wi-Fi
   If your device has Wi-Fi capabilities, from the existing Wi-Fi networks list, click on the name of your modem, then in the window that opens, enter your user password, and then click OK. Now, you are connected to high-speed Internet in Rightel network.
2. with Cable
   1.2. connect the devices to your system with the cable.
   2.2 The device will detect new hardware, and after typing 192.168.0.1 the managing panel of the modem is opened.

   

Software Settings

For any changes in software settings when your device is connected to Ri-Fi, on your Internet browser type 192.168.1.1 on URL bar; in the opened window type your username (admin) but do not type anything for password.

Username and Password Settings

In the opened page, you can change the name and password of the device. To change password, you can use methods below:
1- Wizard/Step 3/ Password setting & SSID
2- WiFi/Basic/Pre-shared Key & SSID

PIN Settings

If SIM PIN Code is enabled, after entering the user panel of modem, message “Pin required” is displayed. The SIM PIN must be entered in the below path and then choose “PIN Unlock”.
If you wish to disable PIN, at this point disable the PIN Code so that the option will be disabled on the SIM PIN.
Internet/SIM/SIM lock/Unlock configuration
To disable, change or activate SIM PIN Code you can apply the following methods:

Roaming Settings

The modem can be used in roaming mode. Settings of the modem in default state is on auto mode, so roaming is automatically selected. If you wish to only use 3G mode, you can do the below settings:
Internet/ 2/3G Modem/ Setting The network type shall be set on “Only 3G”.

Support

The support services for DWR-730 are provided by Easy Computer Co. in Tehran and major cities.
The contact information for support or DWR-730 device in Tehran and other cities are as follows:
Tehran Office: 021-43983000 / 021-43983500
Fars Office: 071-36472636-7
Khorasan Office(Mashhad Shabakeh-Parseh store): 0513-7653101
East Azerbaijan Office: 041-35548237
Khuzestan Office: 061-32231245
Isfahan Office: 031-36638024
Support services include a 2 year guarantee from date of purchase.

Features

• supporting Rightel 3rd and 4th generation network
• 1.4 inch screen which allows you to view and change settings on the display of device
• Supports regular-sized SIM cards
• simultaneous Connection of up to 10 users
• Battery capable of 10 hours of continuous use of 4th generation networks by multi-users and 600 hours of STANDBY mode
• change settings without entering the portal settings
• Easy and fast connection to the Internet
• supporting SMS
• supporting Micro SD Memory up to 32 GB
• User panel separately for phone and PC
• two SIM card adapter
• Supporting roaming

Installation Method

1. Remove the back lid.


2. Remove the battery.

3. Insert the SIM card in the specified slot and from the label on the back side of modem, write down device name and user password.


4. Replace the battery and put the lid back in place.


5. The device has on / off switch. Press the key as shown below, to turn the device on.

Indicator Guide
You can use the indicators to obtain information about the status of the device in different situations.

Connect to Internet

1. via Wi-Fi
   If your device has Wi-Fi capabilities, from the existing Wi-Fi networks list, click on the name of your modem, then in the window that opens, enter your user password, and then click OK. The username and password is provided on the back lid of the device and it can be reached via the menu key on the device on Menu – Device Info.
   Now, you are connected to high-speed Internet in Rightel network.
2. with Cable
   2.1 connect the devices to your system with the cable.
   2.2 The operating system automatically detects new hardware and it will be connected to internet.

Ri-Fi Settings without entering User Portal
Using menu key, you can change the settings of the device. The On/OFF key will approve the options and enables you to move in the menu.

1. Data Activation on Roaming Mode
   After entering “Roaming Data”, you can enable or disable this option.
2. Change Network Mode
   Entering “Network Mode” inside this menu, you have 3 options: 4G only, 4G Pref and 3G Only. If you wish to only be connected to one of 3rd and 4th generation networks of RighTel, you can change the network mode to 4G Only or 3G Only.

Using menu key, you can change the settings of device. On/Off key will approve the options and Menu key will move you between menu options.

Software Settings
Setting up a Username and Password for the Device
For any changes in software settings via the user portal, type the address 192.168.0.1 or http://tplinkmifi.net on your Internet browser when your device is connected to Ri-Fi. in the page that opens write user name (admin) and password (admin). Please consider lowercase and uppercase letters.

1. via the Phone Panel
   In wireless settings menu you can change SSID and wireless Password.
   
2. via PC Panel
   In the menu Advanced> Wireless> Basic Settings you can change SSID and wireless Password.
   

PIN Settings
If SIM PIN Code is enabled, after turning on the Ri-Fi, (Pin required) a message is shown on the display. In this case, the user must enter the SIM PIN through the panel. If you wish to disable pin for the later use, you can disable the PIN at this stage. To enter the PIN code from the bellow:

1. via the Phone Panel
   By entering the phone panel, the first step is to enter the SIM PIN to enable it.
   
   Go to Device> Advanced> Pin Management, to disable the pin code until next time of setting changes. By choosing to turn off “Enable PIN” and enter a PIN code, this may be possible.
   
2. via PC Panel
   Advanced>Pin management
   Also from this menu you can disable the PIN until the next change. For this change please select “Pin Management” Option and enter the PIN code.
   

APN Settings
These settings are automatically made and to access the APN settings you can follow this path:
Setting/Dial Up/Profile Management

1. via Phone Panel
   Dial-Up>Create
   Its configuration shall be as described:
   Profile name: RighTel
   APN Type: Static
   
   
2. via PC Panel
   Advanced>Dial-up>Dial-Up Settings>Create
   Its configuration is as described:
   Profile name: RighTel
   APN Type: Static
   APN: RighTel
   
   

Roaming Settings
The modem can be used in roaming mode. Modem network mode settings on the default form are on 4G Ref option, so roaming is automatically selected. If the modem is used in roaming, the roaming symbols on the screen of modems are shown with “R”. If the network mode is set on 3G Only or 4G Only Ri-Fi cannot use roaming mode.
Under normal conditions when the modem is in roaming mode, there will be no Internet access. If you wish to use the Rightel Internet in roaming mode, Data Roaming option should be enabled from the following path:

1. via the Phone Panel
   By address Dial-Up> Data roaming settings can be changed to enable data roaming.
   
2. via PC Panel
   Advanced>Dial-up>Dial-Up Settings>Create
   By address Advanced> Dial-Up> Dial-Up Settings to activate data roaming settings can be changed.
   

SMS Help
Via user Panel the SIM card’s SMS service can be accessed.

1. via the Phone Panel
   By referring to SMS menu, the received text messages can be seen and send.
   
2. via PC Panel
   By referring to SMS menu, the received text messages can be seen and send. it is also possible to view messages posted on the panel.
   

Support

The M7350 support services, based on the label on device, is provided by one of the companies including Pars Ertebat, Sazgar Argham and Metam F in Tehran & Metropolises.
It is worth mentioning that support services include a one-year replacement warranty and two years after sales service.

Features

• 3G and 4G support
• 0.96 inch screen
• Supports regular-sized SIM cards
• Simultaneous connection of 10 users
• 2640 mAh battery
• Easy and quick connection to internet
• SMS support
• Micro-SD support
• USSD support

Installation

1. Remove the device lid.
   
   
2. Remove the battery.
   
3. Insert the SIM card and write the device and password provided on the back of the lid.
   
4. Put the battery and lid back in place.
   
   
5. There is an on/off switch on the device. Push the switch as shown in the image to turn the screen on.
   

Ri-Fi DWR 932-D1 indicator guide

You can check the information shown on display screen to be aware of your device status.

Conenct to internet

1. via Wi-Fi
   If your device has Wi-Fi capabilities, from the existing Wi-Fi networks list, click on the name of your modem, then in the window that opens, enter your user password, and then click OK. Now, you are connected to high-speed Internet in Rightel network.
2. with Cable
   2.1 Connect the device to your system with the cable.
   2.2 The operating system automatically detects new hardware and connects to internet.

Software Settings

Username and password setting

For any changes in software settings when your device is connected to Ri-Fi, on your Internet browser enter 192.168.1.1 on URL bar; in the opened window type your username (admin) and leave the password empty. Please consider uppercase and lowercase letters.

PIN Settings

If SIM card PIN Code is enabled, after the ri-fi is turned on a message showing “PIN locked” is seen on the screen. In this mode enter the SIM PIN through user panel. If you wish to disable PIN, disable the PIN at this stage. To enter the PIN track the following path:
Internet settings>SIM Card PIN Lock>Disable Protection

Through this path, the PIN code could be disabled until setting is changed. This is possible by deactivation “disable protection” and entering the PIN.

APN Settings

APN setting is automatically done. To access APN settings track the following path:
Internet Settings>APN Settings>APN

Wi-Fi settings

To change the name of the SSID (the name through which you can identify WiFi on other devices) and password, you can do the following:
Wi-Fi Settings > Wi-Fi Security Settings
In this window, in order to define the new name for WiFi, enter the name in the SSID for Wi-Fi window. You can also use the following ways to change the password on this page:

1. Use the New Key button to automatically create a password. The new password created by checking the Show Characters is visible.
2. Define the password in the Pre-shared key window, which should contain upper and lowercase letters, digits and at least 8 characters. The new password is defined according to the previous option, by checking the Show Characters option.

Roaming Settings

The modem can be used in roaming mode. Settings of the modem in default state is on auto mode, so roaming is automatically selected. If the modem is used in roaming mode, in the main page of user panel “R” is displayed. In case network status is set for 3G or 4G mode, ri-fi does not go to roaming mode. Under normal conditions when the modem is in roaming mode, Internet access is available. If you do not want to use the Rightel Internet in roaming mode, you may deactivate “allow Data Roaming” through the following path:
Internet Settings>Connection Mode Settings>Allow Data Roaming

SMS manual

SMS service could be used through user panel.
Refer to the following menu to view received SMS or send SMS:
Application Settings>Short Messages

USSD manual

Rightel USSD codes could be used through user panel.
To send USSDs track the following path:
Application settings>USSD

Support

The support services for DWR-730 are provided by Easy Computer Co. in Tehran and major cities.
The contact information for support or DWR-730 device in Tehran and other cities are as follows:
Tehran Office: 021-43983000 / 021-43983500
Fars Office: 071-36472636-7
Khorasan Office(Mashhad Shabakeh-Parseh store): 0513-7653101
East Azerbaijan Office: 041-35548237
Khuzestan Office: 061-32231245
Isfahan Office: 031-36638024
Support services include a 2 year guarantee from date of purchase.

Features

• 3G and 4G support
• Display Screen on which the setting of device and network could be chesked and changed
• Simultaneous connection of 10 users
• Unchangeable 2020 mAh battery
• Dual-punch SIM card support (Micro SIM)
• Easy and quick connection to internet
• SMS support
• Micro-SD support
• USSD support

Installation

1. Remove SIM card slot lid.
2. Insert the SIM card in the slot.
   
3. Close SIM card lid.
4. There is an on/off switch on the device. Press the switch as shown in the image to turn the screen on.
5. Press WPS button to see device name, password and connection details

Ri-Fi DWR 932-D1 indicator guide

You can press WPS button to see device status via information shown on the screen

By pressing WPS button the following information is shown on the screen

• Device name and password
• Connection time span and used traffic
• User pannel address
• Software and harware details of the device

Connect to Internet

1. via Wi-Fi
   If your device has Wi-Fi capabilities, from the existing Wi-Fi networks list, click on the name of your modem, then in the window that opens, enter your user password, and then click OK. Username and password are shown on the screen when WPS button is pressed. Now, you are connected to high-speed Internet in Rightel network.
2. with Cable
   2.1 Connect the device to your system with the cable.
   2.2 The operating system automatically detects new hardware and connects to internet.

Software Settings

Username and password setting

For any changes in software settings when your device is connected to Ri-Fi, on your Internet browser type 192.168.1.1 in URL bar; in the opened window type your username (admin) and leave the password empty. Please consider uppercase and lowercase letters.

PIN Settings

If SIM card PIN Code is enabled, after the ri-fi is turned on a message showing “PIN locked” is shown on the screen. In this mode enter the SIM PIN through user panel. If you wish to disable PIN, disable it at this stage. To enter the PIN, use the following path:
Internet settings>SIM Card PIN Lock>Disable Protection Through this path, the PIN code could be disabled until setting is changed. This is possible by deactivating “disable protection” and entering the PIN.

APN Settings

APN setting is automatically done. To access APN setting use the following path:
Internet Settings>APN Settings>APN

Wi-Fi settings

To change the name of the SSID (the name through which you can identify WiFi on other devices) and password, you can do the following:
Wi-Fi Settings > Wi-Fi Security Settings
In this window, in order to define the new name for WiFi, enter the name in the SSID for Wi-Fi window. You can also use the following ways to change the password on this page:

1. Use the New Key button to automatically create a password. The new password created by checking the Show Characters is visible.
2. Define the password in the Pre-shared key window, which should contain upper and lowercase letters, digits and at least 8 characters. The new password is defined according to the previous option, by checking the Show Characters option.

Roaming Settings

The modem can be used in roaming mode. Settings of the modem in default state is on auto mode, so roaming is automatically selected. If the modem is used in roaming mode, in the main page of user panel “R” is displayed. In case the network status is set for 3G or 4G mode, ri-fi does not go to roaming mode.
In normal conditions, it is possible to use the Internet when the modem is in roaming mode. If you do not want to use the Internet in roaming mode, you can disable Allow Data Roaming option as the following ways.
Internet Settings>Connection Mode Settings>Allow Data Roaming

SMS manual

SMS service could be used through user panel.
Refer to the following menu to view SMSs received or send SMS:
Application Settings>Short Messages

USSD manual

Rightel USSD codes could be used through user panel.
To send USSDs use the following path:
Application settings>USSD

Support

The support services for DWR 932-B1 device are provided by Easy Computer Co. in Tehran and major cities.
The contact information for support or DWR 932-B1 device in Tehran and other cities are as follows:
Tehran Office: 021-43983000 / 021-43983500
Fars Office: 071-36472636-7
Khorasan Office(Mashhad Shabakeh-Parseh store): 0513-7653101
East Azerbaijan Office: 041-35548237
Khuzestan Office: 061-32231245
Isfahan Office: 031-36638024
Support services include a 2 year guarantee from date of purchase.

Features

• Supports RighTel 3G & 4G network
• Easy and quick connection to the Internet without the need to perform settings.
• With display screen and the ability to view device and network settings on it.
• Supports regular-sized SIM cards
• Ability to connect up to 10 simultaneous users
• Battery with 10 hours of continuous use (2380 mA )
• Ability to online update the software (Over the air).
• Supporting SMS & USSD
• 2.4 GHz Wi-Fi frequency band support.
• Supports all standard Wi-Fi (802.11n).
• Support for memory cards (Micro SD) up to 32 GB
• Maximum download speed 150Mbps and 50Mbps Upload.
• Having application and modem management for the phone separately.

Installation

1. Remove the device lid.
   
2. Remove the battery.
   
3. Insert the SIM Card and at the specified place and then reinsert the battery.
   
4. Before closing the back of the device according to the picture, write the SSID name and password from inside of the device lid.
   
5. Put the battery and lid back in place.
   
6. There is an on/off switch on the device. Push the switch as shown in the image to turn the screen on by displaying the Welcome message.
   
   

Ri-Fi DWR 932-D2 indicator guide

You can check the information shown on display screen to be aware of your device status.

Connect to internet

1. via Wi-Fi
   If your device has, Wi-Fi capabilities, from the existing Wi-Fi networks list, click on the name of your modem, then in the window that opens, enter your user password, and then click OK. Now, you are connected to high-speed Internet in RighTel network.
2. with Cable
   2.1 Connect the device to your system with the cable.
   2.2 The operating system automatically detects new hardware and connects to internet.

Connect to Internet

1. via Wi-Fi
   If your device has Wi-Fi capabilities, from the existing Wi-Fi networks list, click on the name of your modem, then in the window that opens, enter your user password, and then click OK. Username and password are shown on the screen when WPS button is pressed. Now, you are connected to high-speed Internet in Rightel network.
2. with Cable
   2.1 Connect the device to your system with the cable.
   2.2 The operating system automatically detects new hardware and connects to internet.

Software Settings
Username and password settings

For any changes in software, settings when your device is connected to Ri-Fi, on your Internet browser enter 192.168.1.1 on URL bar; in the opened window type your username (admin) and leave the password empty. Please consider uppercase and lowercase letters.

PIN Settings
If SIM card PIN, Code is enabled, after the Ri-fi is turned on a message showing “Enter PIN” is seen on the screen. In this mode, enter the SIM PIN through user panel. If you wish to disable PIN, disable the PIN at this stage.
To enter the PIN track the following path:
Internet settings>SIM Card PIN Lock>PIN Code

Through this path, the PIN code could be disabled until setting is changed. This is possible by deactivation “disable PIN” and entering the PIN.
APN Settings
APN setting is automatically done. To access APN settings track the following path:
Internet Settings>APN Settings>APN

Wi-Fi settings
To change the name of the SSID (the name through which you can identify WiFi on other devices) and password, you can do the following:
Wi-Fi Settings > Wi-Fi Security Settings
In this window, in order to define the new name for WiFi, enter the name in the SSID for Wi-Fi window. You can also use the following ways to change the password on this page:

1. Use the New Key button to automatically create a password. The new password created by checking the Show Characters is visible.
2. Define the password in the Pre-shared key window, which should contain upper and lowercase letters, digits and at least 8 characters. The new password is defined according to the previous option, by checking the Show Characters option.

Roaming Settings
The modem can be used in roaming mode. Settings of the modem in default state is on auto mode, so roaming is automatically selected. If the modem is used in roaming mode, in the main page of user panel “R” is displayed. In case network status is set for 3G or 4G mode, ri-fi does not go to roaming mode. Under normal conditions when the modem is in roaming mode, Internet access is available. If you do not want to use the RighTel Internet in roaming mode, you may deactivate “allow Data Roaming” through the following path:
Internet Settings>Connection Mode Settings > Allow Data Roaming

SMS manual
SMS service could be used through user panel. Refer to the following menu to view received SMS or send SMS:
Application Settings>Short Messages > Inbox

USSD manual
RighTel USSD codes could be used through user panel. To send USSDs track the following path:
Application settings>USSD

Support

The support services for DWR 932-D2are provided by Easy Computer Co. in Tehran and major cities.
The contact information for support or DWR 932-D2 device in Tehran and other cities are as follows:
Tehran Office: 021-43983000 / 021-43983500
Fars Office: 071-36472636-7
Khorasan Office(Mashhad Shabakeh-Parseh store): 0513-7653101
East Azerbaijan Office: 041-35548237
Khuzestan Office: 061-32231245
Isfahan Office: 031-36638024
Note:

Support services include a 2 year guarantee from date of purchase.